Catalog Avantes 2024 12-04-2024
SensLine - AvaSpec-ULS2048x64-EVO High UV and NIR Sensitivity Spectrometer
Avantes offers a series of uncooled spectrometer configurations suitable for measurements in the near-infrared range up to 17 µm The AvaSpec NIR256-17-EVO and the AvaSpec-NIR512-17-EVO use the same high-sensitivity optical bench with the next generation of electronics, delivering exceptional performance specifications Both instruments offer a sample speed of only 053 ms/scan and integration times as fast as 20 µs If resolution is crucial or more data points are required for modeling, the 512-pixel detector is a better choice for your application The AvaSpec-NIR256/512-17-EVO spectrometers feature trusted InGaAs array detectors with ultra-low noise electronics boards with a USB3 and Giga-Ethernet connection port They also have digital and analog I/O ports for external triggering and control over the shutter and pulsed light sources The instruments come with two distinct soft ware-controlled gain-setting modes, high-sensitivity mode (HS, default) and low-noise (LN) mode These affordable, uncooled instruments are USB-powered and available with four gratings and replaceable slits to match the bandwidth and requirements of your application NIRLine - AvaSpec-NIR256/512-1.7-EVO Near-Infrared Fiber-Optic Spectrometer
Alongside the cooled AvaSpec-ULS2048x64TEC-EVO with low-noise detector, Avantes also offers the more cost-effective, uncooled AvaSpec ULS2048x64-EVO With its standard 2048x64 back-thinned detector, this spectrometer is perfect for applications in the UV and NIR range For applications that require integration times lower than 2 seconds, the cooling option is often not needed For example, this uncooled AvaSpec ULS2048x64-EVO has an established track record in various DOAS applications all over the world because of its high UV response and 09 mm detector height that enables detecting the wavelengths of interest Options include an order-sorting filter to reduce second-order effects and purge ports for deep-UV measurements The AvaSpec-ULS2048x64-EVO comes with a wide range of slit sizes and gratings and can be con- figured with SMA or FC/PC fiber-optic entrance connectors The AvaSpec ULS2048x64-EVO uses the AS7010 electronics board offering USB3, Gigabit Ethernet, and better signal processing The instrument comes complete with AvaSoft-basic software, a USB cable, and an extensive manual
Technical Data Optical bench ULS, Symmetrical Czerny-Turner, 75 mm focal length Wavelength range 200-1160 nm Resolution 009–20 nm, depending on configuration (see table)
Technical Data
Spectrometer Optical Bench
AvaSpec-NIR256-1.7-EVO
AvaSpec-NIR512-1.7-EVO
Symmetrical Czerny-Turner, 50 mm focal length,
Wavelength range
900-1700 nm
Stray light < 1%, depending on the grating Sensitivity 650,000 counts/µW per ms int time Detector Back-thinned CCD image sensor 2048x64 pixels (height: 089 nm) Signal/noise 450:1 AD converter 16-bit, 133 MHz Integration time 24 ms–25 seconds Interface USB 30 high-speed, 5 Gbps, Gigabit Ethernet 1 Gbps
Resolution (slit & grating dependent) Sensitivity HS in counts /µW per ms
2-50 nm
8,200,000 (integral 1000-1750 nm)
3,880,000 (integral 1000-1750 nm)
Dynamic Range HS Integration time HS
6000:1
10 µs–500 ms
Signal/Noise HS
1900:1
Sensitivity LN in counts /µW per ms
469,000 (integral 1000-1750 nm)
222,000 (integral 1000-1750 nm)
Dynamic Range LN Integration time LN
9000:1
Sample speed with on-board averaging 24 ms/scan Dark noise 115 cnt RMS Dynamic range 6100
10 µs–10 s
Signal/Noise LN 5000:1 Detector InGaAs linear array, 256 pixels, 50 µm x 500 µm InGaAs linear array, 512 pixels, 25 µm x 500 µm AD converter 16-bit, 500 kHz 16-bit, 500 kHz Interface USB30 high speed, 5 Gbps, Gigabit Ethernet 1 Gbps
Data transfer speed 24 ms/scan (USB3)
Digital IO HD-26 connector, 2 Analog in, 2 Analog out, 13 Digital bidirectional, trigger, sync, strobe, laser Power supply Default USB power, 885 mA Or external 12VDC, 420 mA Dimensions, weight 177 x 127 x 44,5 mm (1 channel), 1180 grams
Sample speed with store to RAM
053 ms/scan
Data transfer speed
053 ms/scan (USB3)
HD-26 connector, 2 Analog in, 2 Analog out, 13 Digital IO bi-directional, trigger, synchronization, strobe, laser
Digital IO
Power supply
Default USB power, 600 mA or external 12VDC, 320mA (4W)
Dimensions, weight
185 x 100 x 184 mm, 27 kg
FULL PRODUCT SPECIFICATIONS
FULL PRODUCT SPECIFICATIONS
Want to know the full product specifications, gratings selection, resolution table, accessories options and ordering information? Click here or scan the QR code on the right
Want to know the full product specifications, gratings selection, resolution table, accessories options and ordering information? Click here or scan the QR code on the right
26 | info@avantescom | wwwavantescom
info@avantescom | wwwavantescom | 27
Made with FlippingBook flipbook maker