Avantes - Product Catalog - 2024 - digital

Fiber Optic Switch (FOS-2-INL) AAvantes’ fiber optic switch (FOS) is the ideal accessory to correct light source drift This FOS is operated electronically via TTL signals from an external source or one of our AvaSpec spectrometers TTL signals can be provided by an external device or an AvaSpec spectrometer connected via an interface cable

Direct-Attach Shutter A good dark measurement is necessary for accurate results during transmission, absorption, reflection, irradiance, or color measurement at different integration times Taking this dark measurement often leads to having to undertake manual actions, like covering the sensor or switching off the light This might be problematic with certain applications because of the time and place or operator restraints Our solution: a remote-controlled shutter positioned between the spectrometer entrance and the input fiber Avantes’ direct-attach shutter is the ideal accessory to facilitate the automatic shuttering of a spectrometer This shutter is operated via TTL pulses from an external source or an AvaSpec spectrometer through a cable (IC-DB26-AS SHUTTER-06, to be ordered separately) The DA-Shutter switch unit is directly attached to the spectrometer’s SMA input connector The fiber normally connected to the spectrometer is then connected to the DA-Shutter This switch unit and the power source, and the TTL control signal are connected to the control box The industrial-graded shutter motor used inside will support heavy usage of the instrument With its 5,000,000 cycles, 24/7 operation is supported in most cases To operate the DA-Shutter, a PS-12V/208A 12-volt DC power adapter is required (to be ordered separately)

The FOS is coupled in the optical paths between SMA-terminated fibers and features four COL-UV/VIS collimating lenses (UV/VIS/NIR)

Both light paths can be controlled independently via the two TTL signals

The industrial-graded shutter motors inside support the instrument’s heavy usage With its 5 million cycles, 24/7 operation is supported in most cases To operate the FOS, a PS-12V/208A power supply and interface cable are required (ordered separately)

Technical Data

Technical Data

Wavelength range Fiber connection Shutter frequency

200 - 2500 nm

Wavelength range 200-2500 nm Fiber connection SMA-905 connector Spectrometer connection SMA-905 connector (female) Shutter frequency Max 5 Hz Shutter delay 15 ms Attenuation/amplification DA-Shutter +06 dB (AvaSpec HSC/HERO), -15 dB (AvaSpec HSC/NIR)*, +06 dB (AvaSpec-ULS/Mini) Material Black anodized aluminum Dimensions switch unit (DxH) 30 x 38 mm Dimensions control box (HxLxW) 28 x 58 x 45 mm Power 12V DC/500 mA Lifetime shutter 5,000,000 cycles (typical)

4 SMA-905 connectors, incl 4 COL-UV/VIS collimating lenses

Max 5 Hz

Shutter delay

15 ms

Shutter attenuation

-10 dB*

Material

Black anodized aluminum

Dimensions

34 x 58 x 45 mm

Lifetime shutter

5,000,000 cycles (typical)

Power

12V DC/500 mA

FULL PRODUCT SPECIFICATIONS

FULL PRODUCT SPECIFICATIONS

Want to know the full product specifications, gratings selection, resolution table, accessories options and ordering information? Click here or scan the QR code on the right

Want to know the full product specifications, gratings selection, resolution table, accessories options and ordering information? Click here or scan the QR code on the right

104 | info@avantescom | wwwavantescom

info@avantescom | wwwavantescom | 105